服务热线：0755- 83387360
产品介绍
The TPS6213X family is an easy to use synchronous step down DC-DC converter optimized for applications with high power density. A high switching frequency of typically 2.5MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by use of the DCS-Control™ topology.
With their wide operating input voltage range of 3V to 17V, the devices are ideally suited for systems powered from either a Li-Ion or other batteries as well as from 12V intermediate power rails. It supports up to 3A continuous output current at output voltages between 0.9V and 6V (with 100% duty cycle mode). The output voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable and open-drain Power Good pins.
In Power Save Mode, the devices draw quiescent current of about 17μA from VIN. Power Save Mode, entered automatically and seamlessly if load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and shutdown current consumption is less than 2μA.
The device, available in adjustable and fixed output voltage versions, is packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
订购信息
| 器件类目 |
产品型号 |
封装描述 |
环境温度 |
是否在产 |
应 用 | 丝 印 |
| 同步降压IC | TPS6213 0ARGTR |
VQFN16 |
–40~150°C |
是 |
锂离子电池供电、便携式设备
|
AHKZ |
原理图
产品特性
应用范围
原装现货，技术选型
云仓现货，快速配送
品类齐全，性能优良
工厂直销，样品申请
荣誉资质
咨询热线
0755- 83387360
